武汉中创联达科技有限公司

Invisible®Vision Super-UVi (SUVi)系列专利相机增强器，专为严格的科学应用而设计。它们提供了一个无与伦比的分辨率超过75 lp/mm，加上极高的输出功率/寿命以及线性信号放大的数据获取。容易同步和光学透镜耦合到一个高速摄像机，每个视频帧可以编程门控从50ns和以上在10ns步骤，重复率高达1MHz。可用S20或S25光电阴极,独特的专利系统提供深紫外至可见光响应范围(200 - 900 nm)和适度的系统增益P46(绿色)快速衰减输出荧光材料,也可以通过耦合的前端MCP增强器(线性减少& MTF /分辨率)达到更高的增益或速度控制。

典型的应用有：PIV流体动力学，燃烧研究，放电，生物医学和弹道学以及许多其他高速和超高速宏观成像要求。SUVi易于编程，通过其集成菜单驱动的液晶显示/控制面板或通过其USB接口和软件同步外部TTL或视频信号;提供多个可编程曝光和延迟从30ns在重复频率高达1MHz和超过100帧突发触发模式。先进的功能，如用户可编程输出快门监视器和一个独立的输出频闪仪用于系统的补充。

特点：

·从紫外到近红外的光谱响应范围，高速快门时间可达10纳秒

·高增益以及高灵敏度

·帧率超过1,000,000fps (HSV)

·在burst模式下，帧率可达20,000,000fps

·完善的控制面板以及USB外部控制

·独特的分辨率> 75lp/mm (25mm直径输出口）

·光电阴极：S20（偏重于紫外，从紫外到可见光）或者S25（偏向于可见光，从紫外到近红外）

·磷光体：P46（衰减时间通常小于1微秒）

SUVI 25 Series Camera Instensifier

Intensifier
Input Window	Quartz.
Photocathode	S20 / S25, 200nm to > 850nm (UV to NIR).
Output Window	Glass.
Phosphor	P46 (Green) - decay < typically 1μs.
Luminance Gain	> 400,000 (Limit set by software only)
Output Diameter	25mm (alternative 18mm format also available.
Gating	50ns Minimum (standard unit). 30ns absolute minimum.
Resolution	75 + lp/mm.
Optics
Input	F – mount.
Internal	Integral f/1.2 lens system.
External	Mated f/1.4 lens.
Output Image Format	Maximum usable diameter 25mm.
System	All electronics/controls included within unit. Menu driven LCD control panel / indicators. USB port and graphical user interface s/w. Crystal controlled timing accuracy.
Exposures	50ns to > 1ms in 10ns steps (will allow faster gating)
Delays	50ns > 10ms in 10ns steps.
Burst mode / Multiple Exposure	Up to 100 consecutive programmed delays/exposures per input trigger
Triggering	TTL Positive, TTL Negative. Make / Break (self powered). Composite video frame / field synchronization.
Outputs	User Programmable TTL shutter monitor. User Programmable TTL ‘strobe’ output.
System Photon Gain	Combination of relay optics and intensifier. > 10.Automatic over-brightness (user controlled).
Environmental
Dimensions (approximate)	285 x 168 x 230mm - including output lens & handle.
Weight	11 Kg.
Power	150W (90-264VAC).
Temperature	0℃ to 40℃, non-condensing humidity.
Construction	Aluminium housing.
Mounting	3/8-20 UNC thread on base.
Packaging	Flight box.
Documentation and Software	Supplied on CD.